Welcome Message
I will like to seize this medium to welcome you to the Department of Petroleum Engineering. Petroleum Engineering Department is a Department in SEET (School of Engineering and Engineering Technology) and our focus is to train students towards the development of skills for the effective design, operations and maintenance of oil and gas production facilities.
Vision
Our vision is to become a world-class Petroleum Engineering Department that is able to develop solutions to contemporary oil and gas industry problems and position our graduates to contribute effectively to the development of the oil and gas industry.
Mission
Our mission is captured in the following key objectives:
- To tutor students in a practically oriented manner in such a way that they can easily be integrated into the oil and gas industry.
- To train students that will apply their problem-solving skills in developing solutions to the oil and gas industry problems.
- To develop the research and development skills of our students; in order to improve research and development output of Nigeria.
History of the Department
The Petroleum Engineering Programme started as Petrochemical Science and Technology Programme in the School of Natural and Applied Science (SNAS) now School of Science (SOSC) in 1981 with less than twenty students. At the inception of the School of Engineering and Engineering Technology (SEET) in October 1982, the Petrochemical Science and Technology Programme was restructured (i.e in terms of the curriculum), and renamed the Petroleum Engineering Programme, and transferred to the School as one of the six specific programme areas (the others are Agricultural Engineering, Civil Engineering, Electrical/Electronics Engineering and Mechanical Engineering). The Programme started at Lake Nwaebere Campus (a temporary site for the University) and lectures started in October the same year. In November 1983, Engr. R. M. Aguta (Late) was appointed the Co-ordinator of the Programme until October 1987 when the Senate of the Federal University of Technology, Owerri; approved the introduction of the Chemical Engineering Programme. The Senate also approved the merger of Petroleum Engineering Programme with the Chemical Engineering Programme the same year; with Dr A. I. Njiribeako (now Prof.) as the Co-ordinator. The Petroleum Engineering Programme graduated its first set of students during the 1986/87 session. Following the NUC seminar held in Kaduna in 1988 on courses offered by Federal Universities of Technology, and the subsequent decision of the Federal University of Technology, Owerri to operate a departmental structure, the joint programmes was renamed the Department of Chemical and Petroleum Engineering (CHEM/PET) in 1988 with Dr I. A. Njiribeako (now Prof.) acting as the first Head of Department, followed by Dr B. Obah (now Prof.). Following the movement of the entire University to its permanent site in 1993, the Department was relocated to the new site at New Owerri. On the 28th May 1998, the Chemical and Petroleum Engineering Department was split into two full-fledged Departments:
- The Department of Chemical Engineering
- The Department of Petroleum Engineering
Dr B. Obah (now Prof.) became the Head of the Department of Petroleum Engineering on 28th May 1998 when the Chemical/Petroleum Engineering was split into two Department (the Chemical Engineering Department and the Petroleum Engineering Department respectively). He was succeeded by Dr Okorie Chukwu (15th January 2000 – 30th April 2002). Between (April 2002 – April 2004) Dr I. A. Njiribeako was deployed from the Chemical Engineering Department to Head the Petroleum Engineering Department. He was succeeded by Dr R. M. Aguta in (April 26 2004 – March 28 2006), followed by Dr A. I. B Ekejiuba from March 28, 2006, until October 30, 2008, when he handed over to Engr. Dr K. B. Oyoh (Reader). Between March 2010 to 2011, Engr. Dr M. S. Nwakudu took over. He was succeeded by Prof. B. Obah in October 2012 until June 2013, when he handed over to Engr. Dr Anyadiegwu (July 2013 to June 2015) and was succeeded by Prof. K. O. Okpala (July 2015 to June 2016) and later handed over to Engr. Dr S. I. Onwukwe on (July 2016 to June 2018). He was then succeeded by Engr. Dr N. C. Izuwa from (June 2018 till date).
The Department of Petroleum Engineering graduated it’s first set of students during the 1986/87 session. The Department benefitted from Petroleum Development Trust Fund (PTDF), under its University upgrade system. On the 14th of April 2010, PTDF handed over a complete and well-furnished building with modern teaching and laboratory equipment. Subsequently, every staff moved from the old site to the new site.
Staff List
Academic Staff:
- Engr. Dr. K. C. Igwilo
- Engr. Dr. N. C. Izuwa – H.O. D (Head of Department)
- Engr. Prof. B. Obah – Shell Professorial Chair
- Engr. Dr. S. I. Onwukwe (Reader) – Associate Dean (SEET)
- Engr. Dr. A. I. B. Ekejiuba
- Engr. Dr. C.I.C. Anyadiegwu
- Engr. Dr. U. I. Duru
- Engr. Dr. N. P. Ohia
- Dr. A. O. Chikwe (Class Adviser – Extra Year)
- Engr. Dr. A. Keruwa
- Engr. Dr I. M. Onyejekwe (PG Co-ordinator)
- Engr. Dr. U. J. Obibuike (Exam Officer and Seminar Co-ordinator)
- Engr. Dr. E. Egelle
- Engr. Dr Nnaemeka Uwaezuoke
- Engr. Dr. A. Nwachukwu (Class Adviser Year 5)
- Mr. B. Nzeribe
- Engr. Dr N. C. Nwogu (SIWES Officer)
- Engr. Dr N. U. Okereke (ICT Officer and Year 1 Class Adviser)
- Engr. Dr. I. Oguama
- Engr. M. Udechukwu
- Mr. Odo Jude
- Engr. S. Ibeh
- Mr. Onyebuchi Nwanwe (Class Adviser Year 4)
- Mr. C. H. Onuh
- Mr. E. C. Obioma
Laboratory Staff:
- Mr G. O. Nduwuba (Laboratory Co-ordinator)
- Mrs. E. Amuche
Undergraduate Courses / Course Allocation
Undergraduate Courses
100 Level
| 100 LEVEL HARMATTAN SEMESTER | ||||
|---|---|---|---|---|
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
| MTH 101 | Elementary Mathematics I | 3, 1, 0 | 4 | C |
| PHY 101 | General Physics I | 2, 1, 1 | 4 | C |
| BIO 101 | Biology for Physical Sciences | 2, 0, 1 | 3 | C |
| CHM 101 | General Chemistry I | 2, 1, 1 | 4 | C |
| ENG 101 | Workshop Practice 1 | 0, 0, 1 | 1 | C |
| ENG 103 | Engineering Drawing 1 | 0, 0, 1 | 1 | C |
| GST 101 | Use of English | 1, 1, 0 | 2 | C |
| GST 103 | Humanities | 1, 0, 0 | 1 | C |
| IGB 101 | Use of Igbo Language | 1, 0, 0 | 1 | O |
| FRN 101 | Use of French Language | 1, 0, 0 | 1 | O |
| TOTAL | 21 |
| 100 LEVEL RAIN SEMESTER | ||||
|---|---|---|---|---|
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
| MTH 102 | Elementary Mathematics II | 3, 1, 0 | 4 | C |
| PHY 102 | General Physics I | 2, 1, 1 | 4 | C |
| CHM 102 | General Chemistry I | 2, 1, 1 | 4 | C |
| ENG 102 | Workshop Practice 1 | 0, 0, 1 | 1 | C |
| ENG 104 | Engineering Drawing 1 | 0, 0, 1 | 1 | C |
| GST 102 | Use of English | 1, 1, 0 | 2 | C |
| GST 110 | Sci, Engineering in Society | 1, 0, 0 | 1 | C |
| GST 108 | Social Science I | 1, 1, 0 | 2 | C |
| IGB 102 | Use of Igbo Language | 1, 0, 0 | 1 | O |
| FRN 102 | Use of French Language | 1, 0, 0 | 1 | O |
| TOTAL | 20 |
200 Level
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| MTH 203 | Ordinary Differential Equation | 2, 1, 0 | 3 | C |
| STA 211 | Intro. to Statistics and Probability | 2, 1, 0 | 3 | C |
| CSC 201 | Computer & Application | 2, 1, 1 | 4 | C |
| ENG 201 | Workshop Practice III | 0, 0, 1 | 1 | C |
| ENG 203 | Engineering Drawing III | 0, 0, 1 | 1 | C |
| ENG 207 | Into. To Engineering Materials | 1, 0, 1 | 2 | C |
| ENG 217 | Engineer in the Society | 0, 0, 1 | 1 | C |
| ENG 213 | Engineering Mechanics | 1, 1, 0 | 2 | C |
| ENG 209 | Engineering Thermodynamics | 2, 1, 0 | 3 | C |
| GST 201 | African and Nigerian Cultural Dev. | 1, 0, 0 | 1 | C |
| TOTAL | 21 |
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| MTH 202 | Mathematical Methods III | 2, 1, 0 | 3 | C |
| ENG 206 | Workshop Practice IV | 0, 0, 1 | 1 | C |
| ENG 226 | Intro. To Elect./Electronics Eng. | 1, 1, 1 | 3 | C |
| ENG 224 | Engineering Dynamics | 1, 1, 0 | 2 | C |
| ENG 212 | Engineering Economy | 1, 1, 0 | 2 | C |
| ENG 208 | Intro. To Engineering Materials II | 2, 0, 0 | 2 | C |
| ENG 214 | Comp. Program for Engineering Application | 1, 0, 1 | 2 | C |
| PET 202 | Intro to Pet. Engineering | 1, 0, 1 | 2 | C |
| PET 204 | Basic Geology | 2, 0, 1 | 3 | C |
| ??? TOTAL | TOTAL | 21 | ||
| SIW 200 | Second Year Long Vacation (SIWES) | 0, 0, 2 | 2 | C |
| TOTAL | 23 |
B.ENG (PETROLEUM ENGINEERING) PROGRAMME
200 LEVEL FIRST SEMESTER
ENG 207: Introduction to Engineering Materials (1, 0, 1) 2 Units
A general classification of materials based on atomic and crystal structures. Atomic bonding, imperfections, slip lines dislocations. Mechanical properties of materials, fracture stress, the yield stress of elastic and plastic materials. Ductility, impact strength, hardness, creep and fatigue properties such as corrosion phenomena, control and prevention of corrosion. Alloying theory and solidification cooling curves illustrated by
CSC 201: Computer & Application (2, 1, 1) 4 Units
Two state system; converting number system, logic theory; logic operation; Boolean algebra combination and there various realization.
Minimization techniques; various codes synchronous and asynchronous sequential logic (adder, counter, decoder, multiplexer, etc.). State assignment, minimization and finite state machine. Realization, fault diagnosis and threshold logic limitation of a sequential circuit. Design examples to digital systems. Computer systems: Input/output, interface and peripheral devices such as a keyboard, mouse, disk, network, protocol examples e.g. RS232 and electronics.
Memory devices, the local area and wide area network, two-state systems, converting number system, logic theory, logic operation, Boolean algebra combination and their various realizations.
ENG 203: Engineering Drawing III (0, 0, 1) 1 Unit
Projections: Review of isometric, oblique and axonometric projections. Auxiliary view for detailing, sectioning, true lengths sizes and shapes.
Standard dimensional conventions: Dimensions and tolerances, charts and graphs, Interchangeability units, fits, tolerances, and allowances, machine drawing – keys and keyways, screw bearing, coupling, pipe, pipe fittings, valves, gears, etc. Working instructions such as surface finish, welding and machining symbols.
Use of datum or reference points, lines or planes. Dimensional features for holes, tapers, profiles.
Electrical/electronic symbols, wiring; connection or breadboard diagrams; schematic diagrams.
ENG 213: Engineering Mechanics I (1, 1, 0) 2 Units
Definition of the mass centre, gravity centre, mass, a moment of inertia. Equilibrium equations for particles and rigid bodies (forces and moments). Potential and kinetic energy. Preservation of energy. Principle of virtual work. Examples on linkages and mechanism, flexible connections, cams and work. Motion, the relative motion of links. Nomenclature for gear geometrics.
ENG 209: Engineering Thermodynamics I (1, 1, 0) 2 Units
Definition of terms and general concepts of systems, surrounding process, temperature, heat, work and energy.
The first law of thermodynamics, application to heat engines. Entropy and the second law, combined First and Second Laws. Ideal gases Joule-Thomson’s coefficient. Equilibrium processes. Maxwell’s relation. Two-phase systems. Thermodynamic functions of the solution. P.V.T. relationship. Work from heat pump refrigeration.
ENG 201: Workshop Technology I (1, 0, 1) 2 Units
Laboratory and Workshop: (Basic hours) – Safety rules and regulations. Sources of accidents and prevention, safety gears, safe working environment/condition, ergonomics, laboratory and workshop layouts, working procedures, fire fighting equipment and operations, Lighting and signs, etc. Electrical trades (Power, Electronics, telecommunication), Civil Trades (Building Construction, Roads, Dams, Hydraulics, Sanitation, etc.)
Benchwork: (9 Hours) – Introduction to workshop tools. Use and care of hand tools. Measuring instruments and their uses and equipment, bench fittings. Practical project.
Woodwork: (9 Hours) – Woodwork machines and working principles, operation of machines. Simple woodwork project for fitting and joining.
Machining: (18 Hours) –Introduction to machine tools, their general characteristics. Simple operations of turning, drilling, grinding, milling, threading, horning, buffing, reaming. Introduction to turret lathes, milling machines (horizontal, vertical and universal), Grinding machines (surface grinder, internal grinding machine, external grinding machine, universal grinding machine, shaping machine) Simple practical project)
Fabrication: (9 Hours) –Introduction to fabrication machines, rolling, bending, ribbing, notching, shearing, etc. Operation of machines. Simple project on metal fabrication.
Electrical Wiring: Electrical wiring system: domestic and industrial setup.
300 Level
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| ENS 301 | Intro to Entrepreneurial Skills | 1, 0, 1 | 2 | R |
| ENG 305 | Strength of Materials | 2, 0, 0 | 2 | R |
| ENG 315 | Principles of Engineering Surveying | 2, 0, 0 | 3 | C |
| ENG 309 | Fluid Mechanics | 2, 0, 1 | 3 | C |
| ENG 313 | Technical Report Writing | 1, 1, 0 | 2 | C |
| PET 301 | Drilling Technology I | 2, 1, 0 | 3 | C |
| PET 317 | Petroleum Geology | 2, 0, 1 | 3 | C |
| ENG 307 | Engineering Analysis | 2, 1, 0 | 3 | C |
| TOTAL | 21 |
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| ENG 308 | Engineering Analysis II | 2, 1, 0 | 3 | C |
| ENG 314 | Industrial Studies II | 1, 0, 1 | 2 | R |
| PET 302 | Drilling Fluids Tech. | 2, 0, 2 | 4 | R |
| PET 304 | Reservoir Engineering I | 2, 1, 0 | 3 | C |
| PET 306 | Pet Production Engineering I | 2, 1, 0 | 3 | C |
| PET 310 | Heat and Mass Transfer | 2, 1, 0 | 3 | C |
| Total | Total | 18 | ||
| SIW 300 | Third Year Long Vacation (SIWES) | 0, 0, 2 | 2 | C |
| Total | 20 |
400 Level
| COURSE CODE | COURSE TITLE | L, T,? P | UNIT | STATUS |
|---|---|---|---|---|
| ENG 405 | Engineering Mgt. & Law | 1, 1, 0 | 2 | C |
| PET 401 | Drilling Technology II | 2, 0, 1 | 3 | C |
| PET 403 | Reservoir Engineering II | 2, 1, 0 | 3 | C |
| PET 405 | Pet. Prod. Engineering II | 2, 1, 0 | 3 | C |
| PET 407 | Well Logging | 2, 1, 0 | 3 | C |
| PET 409 | Applied Geophysics in Pet. Exploration | 2, 1, 0 | 3 | C |
| Elective | 2, 1, 0 | 3 | C | |
| TOTAL | 20 | |||
| Electives | ||||
| PET 413 | Alternative Energy Sources | |||
| PET 411 | Oil Pollution and Control | |||
| PET 415 | Petroleum Engineering Rock Mechanics |
| COURSE CODE | COURSE TITLE | UNIT | STATUS |
|---|---|---|---|
| SIW 400 | 4th?Year Second Semester SIWES | 4 | C |
| SIW 401 | 4th?Year Long Vacation SIWES | 2 | C |
500 Level
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| PET 501 | Drilling Technology III | 2, 1, 0 | 3 | C |
| PET 505 | Reservoir Modelling and Simulation | 2, 1, 0 | 3 | C |
| PET 507 | Project 1 | 0, 0, 3 | 3 | C |
| PET 509 | Seminar 1 (Observatory) | 2, 1, 0 | 3 | C |
| PET 519 | Petroleum Economics | 2, 1, 0 | 3 | C |
| PTE 517 | Natural Gas Engineering | 2, 1, 0 | 3 | C |
| Elective | ||||
| Total | 19 | |||
| TOTAL | 21 |
| COURSE CODE | COURSE TITLE | L, T, P | UNIT | STATUS |
|---|---|---|---|---|
| PET 502 | Reservoir Engineering III | 2, 1, 0 | 3 | C |
| PET 504 | Pet. Prod. Engineering III | 2, 1, 0 | 3 | C |
| PET 506 | Enhanced Oil Recovery | 2, 0, 0 | 2 | C |
| PET 508 | Project II | 2, 1, 0 | 2 | C |
| PET 510 | Seminar II (Participatory) | 2, 1, 0 | 3 | C |
| Elective II | 2, 1, 0 | 3 | C | |
| Elective III | 2, 1, 0 | 3 | C | |
| TOTAL | 19 | |||
| Electives | ||||
| PET 511 | Petroleum Transportation and Storage | |||
| PET 512 |
Course Allocation
- PET 301 : Drilling Technology (*K. C. Igwillo; N. Uwaezuoke; N. P. Ohia and Udechukwu)
- PET 317: Petroleum Geology (*A. O. Chikwe; J.U. Obibuike; Ibeh, S. and Nwanwe, O.
- PET 401: Drilling Technology II (*I. U. Duru; N.P. Ohia; A. Kerunwa and Ibeh, S.)
- ENG 309: Fluid Mechanics (*N.C. Izuwa; N. C. Nwogu and M. Udechukwu)
- PET 403: Reservoir Engineering II (*S. I. Onwukwe; A. Kerunwa and Ibeh, S,)
- PET 405: Petroleum Production Engineering II (A. O. Chikwe; A. Nwachukwu; M. I. Onyejwkwe and U. I. Duru)
- PET 407: Well logging (*B Obah; N. C. Izuwa; N. P. Ohia and Odo Jude)
- PET 409: Applied Geology in Petroleum Exploration (*Ohia N. P.; B. Nzeribe and I. Oguama)
- PET 413: Alternatiive Energy Sources (* A.I. B. Ekejiuba; M.I. Onyejekwe and N. C. Nwogu)
- PET 411: Oil Pollution and Control (*C. I. C. Anyadiegwu; B. Nzeribe and Onyebuchi Nwanwe)
- PET 415: Petroleum Engineering Rock Mechanics (*N. C. Izuwa; N. U. Okereke; Odo Jude and I. Oguama)
- PET 501: Drilling Technology III (*K. C. Igwilo; A. Nwachukwu and U. I. Duru)
- PET 505: Reservoir Modelling and Simulation (*B. Obah; K.C Igwilo; A. Nwachukwu; O. Nwanwe)
- PET 511: Petroleum Transportation and Storage (*A. O. Chikwe; N. Uwaezuoke; N. U. Okereke and M. Udechukwu)
- PET 517: Multiphase Flow in Pipes (*C. I. C. Anyadiegwu; J. U. Obibuike; A. Kerunwa and Odo Jude)
- PET 519: Petroleum Economics (*A.I.B. Ekejiuba; M.I. Onyejekwe and J. U. Obibuike)
- PET 513: Offshore Operations (*B Obah; S. I. Onwukwe; U. I. Duru and N. U. Okereke)
- PET 521: Natural Gas Engineering (C. I. C. Anyadiegwu; N. C. Izuwa; I. Oguama and N. Uwaezuoke)
Academic Programme
The academic programme in Petroleum Engineering is structured as follows:
- Undergraduate Programme – Five (5) Years.
- Each year is composed of two semesters (Harmattan and Rain Semester).
- A total of 182-course units are required for a B. Eng. in Petroleum Engineering.
Class of Degrees that could be awarded include:
- First Class – [4.50 – 5.00]
- Second Class Honours Upper – [3.50 – 4.49]
- Second Class Honours Lower – [2.40 – 3.49]
The academic programme for post-graduate is summarized as follows:
- The PGD Programme involves two (2) years of course work and one (1) year of research.
- The Masters Programme in the Department of Petroleum Engineering involves one (1) year of course work and one (1) year of research work.
- PhD programme involves one (1) year of course work before research work begins.
Lectures Timetable
| 8:30 – 9:30 | 9:30 – 10:30 | 10:30 – 11:30 | 11:30 – 12:30 | 12:30 – 1:30 | 1:30 – 2:30 | 2:30 – 3:30 | |
|---|---|---|---|---|---|---|---|
| Monday | MTH 101 | PHY 101 ?(SMAT Lecture Theatre) | GST 101 ?(SMAT Lecture Theatre) | BIO 101 ?(SMAT Lecture Theatre) | GST 201 ?(SMAT Lecture Theatre) | MTH 203 ?(SMAT Lecture Theatre) | ENG 201 (HM) |
| (SMAT Lecture Theatre) | ENG 209 (HM) | ENG 305 (HM) | ENG 305 (HM) | PET 317 (RM III) | PET 317 (RM III) | ENG 313 (SMAT THEATRE) | |
| ENG 209 | PET 401 (RM IV) | PET 401 (RM IV) | PET 411 (RM IV) | PET 411 (RM IV) | PET 403 (RM IV) | ENG 405 T (HM) | |
| (HM) | PET 511 (RM V) | PET 511 (RM V) | PET 511 RM V) | PET 517 (RM V) | PET 517 (RM V) | PET 521 T ?(RM V) | |
| PET 513 (RM III) | PET 513 (RM III) | ||||||
| Tuesday | MTH 203 ?(SMAT ?Lecture Theatre) | CHM 101 ?(SMAT Lecture Theatre) | ENG 101(HM) | MTH 203 (SMAT Lecture Theatre) | IGB 101 (SMAT Lecture Theatre) | ENG 103 (SMAT Lecture Theatre) | STA 211 (SMAT Lecture Theatre) |
| ENG 309 (HM) | ENG 309 (HM) | PET 413 (RM IV) | PET 403 (RM IV) | ENG 307 (HM) | ENG 307 (HM) | ||
| PET 413 T (RM IV) | PET 413 (RM IV) | PET 415 (RM III) | PET 509 T ( RM V) | PET 403 (RM IV) | PET 521 (RM V) | ENG 203 (HM) | |
| PET 415 (RM III) | PET 501 (V) | PET 521 (RM V) | |||||
| PET 501 (RM V) | |||||||
| Wednesday | PHY 101 (SMAT ?Lecture Theatre) | MTH 101 (SMAT ?Lecture Theatre) | GST 101 (SMAT ?Lecture Theatre) | BIO 101 (SMAT ?Lecture Theatre) | LECTURE FREE PERIOD ? | ||
| ENG 207 (HM) | ENG 207 (HM) | ENG 213 | ENG 213 (HM) | ||||
| PET 409 T (RM IV) | PET 301 (RM III) | PET 310 | PET 310 T (RM III) | ||||
| PET 407 T (RM IV) | PET 505 | PET 519 T (RM V) | |||||
| PET 505 (RM V) | |||||||
| Thursday | GST 103 | CHM 101 | FRN 101 ?(SMAT THEATRE) | STA 211(SMAT THEATRE) | ENG 315 | ENS 301 | ENS 301 (SMAT THEATRE) |
| (SMAT THEATRE) | (SMAT THEATRE) | PET 519 (RM V) | ENG 315 (HM) | PET 405 | PET 409 (RM IV) | PET 409 (RM IV) | |
| PET 519 (RM V) | PET 405 (RM IV) | PET 501 | PET 517 T (RM V) | ||||
| PET 510 T | |||||||
| Friday | CHM 101 | PHY 101 (SMAT THEATRE) | MTH 101 (SMAT THEATRE) | MTH 203 ( SMAT THEATRE) | STA 211 (SMAT THEATRE) | CSC 201 (SMAT THEATRE) | CSC 201 ( SMAT THEATRE) |
| (SMAT THEATRE) | ENG 217 (HM) | ENG 217 (HM) | ENG 307 T (HM) | ENG 405 (HM) | ENG 405 (HM) | ||
| ENG 209 T | PET 407 (RM IV) | PET 407 (RM IV) |
Dr. Nkemakolam Chinedu Izuwa
Head of Department, Petroleum Engineering
Senior Lecturer,
PhD (Petroleum Engineering); M.Eng. (Natural Gas Engineering); B. Eng. (Petroleum Engineering);
Email: nkemakolam.izuwa@futo.edu.ng
